In- and outloading scale / hopper scale for in- and outloading of grain and feedstuff, automatic discontinuing, totalizing weighing. Hopper scale, stand-alone, feeder section, feeder hopper, discharge hopper, weigh hopper, charge, batch, DVIU/N, DVIU/F

>> Home - Product programme - Hopper scales - INFO

	< Productprogramme < Solutions < News < Profile < Expertise < History < References < Contact

Automatic hopper scales - INFO

By means of computer control it is guaranteed that the yield of the system will be at its maximum and is characterized by an adequate documentation of the weighing with a possibility for statistics suited for your purpose.

The construction of the hopper scales is consistent. The scales are not only rapid and efficient, but also reliable and environmentally compatible. The flow of the material is continiously under complete control and considerably larger than one would expect, due to the facts stated below:

- A regulation machanism operating at its optimum, securing against unnecessary stops, caused by for example transport hoist.
- A sufficient number of alarm devices for empty and full hoppers.

The scales are fully electronic and are suspended from 4-6 high-quality load cells, which make anti-rolling steering devices unnecessary. Most of the scales shown in the following scheme can be supplied in a special execution according to your needs. Please address your self to Danvægt A/S for further information.

The Danvægt hopper scale is constructed for weighing at a high precision. By means of the frictionless suspension combined with the efficient internal pressure compensation it is ensured that the system returns to its resting point rapidly. Furthermore with the frictionless suspension of the weight hopper it is also ensured that influences from the surroundings do not affect the weighing.

Due to the fact that the system is constructed with well-functioning internal pressure compensation passages the scale can function as a self contained unit without external aspiration in the vast majority of cases. These pressure compensation passages can also be utilized to remove dust fro the scale during weighing; in this way only minimal deposits occur in the interior of the hopper scale. Also as regards the surroundings of the scale dust contamination is avoided as the transition between feeder section, weigh hopper and discharge hopper is protected by means of high quality flexible connections.

Englyst Webdesign

Danvaegt A/S - Fanoevej 3 - 8382 Hinnerup - DK-Denmark - Tel. +45 86 98 55 77 - Fax.+45 86 98 66 37 - info@danvaegt-scales.com